The Effects Of Gun Control On The Death Rate Of The United...

The first article is by Franklin E. Zimring as he addresses the necessity for gun control in the United States. It would seem that the use of handguns increases the death rate of violence by a 3:5 ratio. Controlling this death rate is a potentially lifesaving entity, however only if the use of guns in assaults can be lessened. One social impact that could lower the death rate is the prevention of assaults due to the fear of gun-owning victims who could retaliate against the assailant. The ability a weapon has to produce life threatening injury has a significant impact on the death rate as well. A weapon with a higher caliber such as .45 is more likely to kill then a weapon with a lower caliber such as .25, thus doubling the death rate from assailants who use higher caliber guns. The high death rate can also be linked back to the ready accessibility of guns and the willingness to use maximum force in conflict. The fact that the U.S is a highly violent environment makes the influence o f gun use to the death rate much greater. America has a problem with violence and a problem with guns and each one in turn makes the other more lethal. Common strategies of gun control are the attempt to restrict hazardous people from being able to attain and use guns and to outlaw the use of easily misused guns such as sawed off shot guns, automatic weapons, and grenades from the general public. Most gun control strategies do not make much impact on the use of guns. The second article is byShow MoreRelatedGun Ownership And Gun Related Homicides1386 Words   |  6 PagesAbstract Several peer reviewed studies on the subject of gun ownership and gun related homicides were identified and reviewed. During the research phase it was noted that there are opponents and proponents of gun control that present logical sounding arguments, but there have been several research studies conducted that suggest that there is a positive correlational relationship between gun ownership and gun related deaths, particularly gun related homicides. This paper will review many studiesRead MoreGuns Are Necessary For Hunting, Protection, And Military Involvement Essay1620 Words   |  7 PagesAnderson Composition English 101 12/5/16 Guns Are Needed in America The Constitution of the United States gives the reason why Americans can own guns; â€Å"A well-regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed† (Amendment II). The Second Amendment of the Constitution was ratified on December 15, 1791 because the Founding Fathers of the United States of America understood that guns were necessary for hunting, protectionRead MoreThe Solution For Gun Violence951 Words   |  4 PagesFareed Zakaria: The solution to gun violence is clear Guns in the hands of prospective victims of violence can deter criminal attempts or disrupt crimes once they are attempted, thereby exerting a violence-reducing effect. Oddly enough, guns in the hands of aggressors also have certain violence-reducing effects, along with the more obvious violence-increasing effects. The power which weaponry confers has conventionally been treated as exclusively violence-enhancing - it has commonly been assumedRead Moregun control research essay1222 Words   |  5 Pagesstudied gun control. â€Å"Stricter state gun laws associated with fewer gun deaths, study finds.† The article discussed gun control laws in states with stricter laws tend to have lower rates of gun related homicides, and a suicide (ProCon para. 1) Gun control in the United States is becoming a wide spread issue and is becoming a problem everywhere. Although I am living in a city with uprising crime that has been skyrocketing over the years, I wasn’t aware of this being a n issue all over the United StatesRead MoreGuns Dont Kill People, Criminals Kill People Essay1476 Words   |  6 Pages In America, gun control has been a source of debate for decades. Recently, an increase in the frequency of mass shootings has caused the country to become extremely polarized in relation to the issue. America is often described as having a gun culture as a result of firearms being engrained in its history and perhaps, consequently, has among the highest rates of gun-related crime as well as gun ownership rates, among developed nations. There exists an abundance of scholarly work done in an effortRead MoreGun Control Laws Should Be Enacted1334 Words   |  6 PagesGun Control in America Gun Control in America has been argued back and forth for decades past. On one side it is strongly believed that the Second Amendment suggests that individual citizens have a constitutionally protected right to own a gun and protect themselves. These individuals believe that gun control laws do not in fact reduce gun violence. On the other side it is said if Gun Control laws are enacted there would be less gun and school violence. Also, it would be harder for criminals andRead MoreThe Rights Of Gun Control1679 Words   |  7 Pages In the United States the right to keep and bear arms is a right for Americans protected by the Second Amendment to the Constitution. This Amendment has accounted for many vigorous debates over the nature of its content. This has led for gun control to become an extremely controversial area of American politics. It is primarily defined by two different groups, those supporting gun control and those supporting gun rights. These groups often disagree on the interpretation of laws and court casesRead MoreA Brief Note On The Gun Control Act Of 1968964 Words   |  4 PagesIn A Gun Controlled Society According to the Second Amendment, citizens of the United States have the right to bear arms while protecting ourselves. Gun control is set into place to retain firearms from the hands of the ‘good guys’. In most cases, it is highly plausible for a bad guy to reach hands on a weapon, whether it be from black market, cross borders, or illegal street sales. These men won’t be stopped by just any gun laws. As the saying goes: where there’s a will, there’s a way. Gun controlRead MoreShould All Handguns Be Banned?748 Words   |  3 Pagesin the United States is legal, and it has been an issue on debate for many years with no success so far. It is very important to understand that if handguns dont get restricted or ban from our community, consequences will keep raising and death statistics will speak for themselves. Handguns in our community are directly affecting the future of our children, they are responsible for increasing the number of violent death rate in the United States, and it also keeps having a significant effect in ourRead MoreConcealed Handgun Laws On The United States1597 Words   |  7 Pagesexamines concealed handgun laws in the United States with the purpose of measuring the effects of the laws on crime rates. There is a lot of previously done research on the subject of concealed handgun laws with conflicting results and opinions. Many researchers are in agreement that more research on the subject needs to be done. In this study, states that have implemented the concealed handgun law are compared to crime rates before it was in effect as well as other states that have implemented the law.

Massive Breach At Sony Play Station - 945 Words

Title: Massive Breach at Sony Play Station By Durga Sravani Nandyala Northeastern University, College of Professional Studies Submitted to: Prof. Jason Black Abstract An analysis on the massive data breach on Sony play Station. This document has been presented as an academic exercise. This document would include the causes of the incident, Sony communication to the breach with customers, customer impact on Sony and finally steps taken by Sony in their recovery from the breach. Keywords: Sony Breach, Causes, communication, Customer impact, Steps taken Massive Breach at Sony Play Station Sony is a Japanese multinational corporation headquartered in Tokyo, Japan. It has diversified businesses which primarily focused on Game Entertainment, Electronic, Gaming Consoles and financial services. Sony is one of the comprehensive entertainment companies in the world. Sony group engaged in business through different operation segments like electronics including video games, network services, and medical business. Such a big organization which has a Hugh market has been met with a massive data breach. Let’s see the causes for data breach at Sony. Sony Play station Network outrage was the result of an External Interruption on play station network of Sony and Qriocity services. Here, approximately 77 million accounts personal details were compromised and restricted users of play station from playing online. This attack has been caused due to malicious softwareShow MoreRelatedExploring Corporate Strategy - Case164366 Words   |  658 Pagesmajor crime? Ericsson – i nnovation from the periphery: the development of mobile telephone systems. Direct Care – strategy development in the multistakeholder context of public sector services. BBC – structural changes to deliver a better service. Sony (B) – more structural changes at the high-tech multinational. Web Reservations International – growth of an Irish SME company through its online reservation system and business model. NHS Direct – using communication and information technology to provideRead MoreSocial Legal and Economic Impact of Ebusiness in Ireland13799 Words   |  56 Pagesarticles and books. From a purely entertainment perspective, the internet has provided Streaming Music and Video Sites, Celebrity Gossip Sites, Event Guides for arranging social life, Read Newspapers and Magazines Online, or Listen to Radio and TV Stations from around the world. But with every good thing there must be a downside and with the Internet there is also the problems of online piracy, adult sites, cyberbullying, hacking, viruses and denial of service attacks. The benefits of the InternetRead MoreCase Study148348 Words   |  594 PagesSector Severstal Queensland Rail: QR Ltd (QR) The Changan-Ford Joint Venture: Same Bed but Different Dreams? TNK-BP: from Russia Without Love – a Joint Venture That Almost Fell Apart International HIV / AIDS Alliance Doman Synthetic Fibres plc (B) Sony Corporation: Restructuring Continues, Problems Remain LEAX: Managing Through a Crisis Design and Development of Strategy Processes at RACC Consulting in MacFarlane Solutions NHS Direct: Managing in Difficult Times 235 254 257 264 270 276 281 285Read MoreEdexcel Igcse Economics Answer49663 Words   |  199 Pages2: (a) One reason for the increase in demand for computer games would be a change in tastes. An increasing number of parents are now buying them. Other reasons may be an increase in incomes, heavy advertising by manufacturers such as Nintendo and Sony and possibly a fall in price. (b) The demand for computer games increased by 45% in 2007. A shift in demand, caused perhaps by more parents buying them, will be shown by a shift in the demand curve to the right from D1 to D2. The numbers of gamesRead MoreBrand Building Blocks96400 Words   |  386 Pagesposition in the 1970s, one key explanation is the brand s strong equity, which engendered complacency and a temptation to look for greener pastures. 8. Short-Term Pressures Pressures for short-term results undermine investments in brands. Sony founder Akio Morita has opined that most corporate managers unduly emphasize quick profits rather than try to make products competitive over the long haul. There are several reasons why a short-term focus might persist a. There is wide acceptanceRead MoreManaging Information Technology (7th Edition)239873 Words   |  960 Pagestechnologies and procedures to manage IT security risks. Other new roles at the middle-management level help ensure that contracts with key outsourcing suppliers have successful outcomes (Willcocks and Griffiths, 2010). Senior business managers also play IT leadership roles by serving on committees that approve and prioritize new IT investments and by sponsoring IT investments for their business areas. Other business managers may serve as business process experts on IT project teams to select, designRead MoreNokias Human Resources System144007 Words   |  577 Pagesassets are located and we do business; any disruption to information technology systems and networks that our operations rely on; unfavorable outcome of litigations; allegations of possible health risks from electromagnetic fields generated by base stations and mobile products and lawsuits related to them, regardless of merit; our ability to achieve targeted costs reductions and increase profitability in Nokia Siemens Networks and to effectively and timely execute related restructuring measures; 6 Read MoreManagement Course: Mba−10 General Management215330 Words   |  862 Pagesreporting that the donor is deceased. Or she plays mental games. â€Å"I think to myself, A goes in this pile, B goes here and C goes there—sort of like Bingo.† She says she sometimes feels â€Å"like a machine,† particularly when she ï ¬ lls out the â€Å"control card† on which she lists â€Å"time in† and â€Å"time out† for each tray of envelopes. In a slot marked â€Å"cage operator† Ms. Smith writes her code number, 3173. â€Å"That’s me,† she says. Barbara Ann Wiles, a keyboard operator, also plays mind games to break up the boredom. TappingRead MoreProject Managment Case Studies214937 Words   |  860 Pagesyears or so to get used to this idea of multiple information systems, but now we have it well under control. We have never had to lay people off in the Lampco Division. Yet, our computer engineers still feel that a reduction in DoD spending may cause massive layoffs here. Personally, I m not worried. We ve been through lean and fat times without having to terminate people. The big problem with the Lampco Division is that because of the technology developed in some of our other divisions, Lampco mustRead MoreAccounting Information System Chapter 1137115 Words   |  549 Pagesthe user to that company’s websi te. Users may then proceed to learn more about the item and order it with a click of the button. 2. The Japanese now use cell phones to watch up to 7 free television stations. Newer models can digitally record up to 30 minutes of those television programs. 3. SONY has a hard disk recorder that can be programmed via mobile phone to record TV shows. 4. Cell phones are also being used as a remote for televisions and karaoke players. 5. The Japanese also use cell

Cost Control and Procurement free essay sample

Clients of the construction industry are becoming larger, more efficient and adopting more sophisticated techniques for forecasting and controlling costs. As a result, the Construction Industry requires professional advisors for building projects to demonstrate a high degree of efficiency and expertise in advising on costs. 4. The trend of modern designs, new construction techniques, new materials and new methods of construction give designers a wider choice of products. The result of this growing trend is a wider variety in construction products. Efforts to produce balanced designs and achieve value-for-money using traditional methods of estimating have severe limitations, which demonstrate the need for effective ways of controlling costs. 5. Existing estimating methods have sometimes not been adequate in giving estimated costs. When this happens, the project involved may receive a lot of adverse publicity. 6. In a bid to win more t6enders, most contractors may reduce their profit margins. With reduced profit margins, there is now a greater cost-consciousness ton ensure that any possible losses are avoided through effective cost control. . The increasing emphasis on the elimination of waste in construction and the need to use the world’s diminishing resources judiciously calls for improved methods of forecasting and controlling the costs of construction. 8. The cost of capital for construction has become very high as a result of inflation and high interest rates. Coupled with a general shortage of investment capital for construction as a result of global economic trends and restrictions on the use of capital, these all make effective cost control very important. 9. The rising demand for integrated design that efficiently delivers both building and services elements in complex developments like hospitals, airports etc. , require effective cost planning to ensure that the design solution delivers value-for-money. PURPOSE OF COST CONTROL 1. Limits the client’s expenditure keeping it within the agreed amount. (means that the tender sum and final account should be approximately equal to the budget estimate). 2. Helps during the design stage to achieve a balance in the expenditures for the various elements of the proposed building. . Provides the client with value-for-money (ensures resources are used to the best advantage)- a building that is soundly constructed, which has satisfactory appearance and is well suited to perform the functions required as well as completed on time. HISTORICAL DEVELOPMENT OF COST CONTROL In the 18th century, there were no main contractors as they operate now. Instead, buildings were constructed by groups of trades men working for themselves. Measurers were employed to measure and value the cost of work both at the design stage and when they had been constructed. The measurers argued on behalf of the tradesmen with the client and architect. In the 19th century, the main contractor system was introduced. This introduced price competition before construction. This necessitated the need for skills in pre-construction measuring, taking-off quantities from drawings before construction was started. These quantities were assembled into the bill of Quantities which provided a rational basis for competition amongst contractors. This stage in the development of the quantity surveying profession meant that work was measured and priced after the design prior to execution. In the next stage, approximate estimating techniques were introduced. These would help forecast a probable tender figure. Reasonably accurate probable costs can be determined early in the design process using cost planning techniques and cost analysis methods. With increasing complexity of building projects and the accompanying specialist skills required to design these presents a wide variety of alternative solutions. Most clients need the reassurance that their money is being spent well which underscores the need for the quantity surveyor’s role. as the financial advisor to the construction industry, he is responsible for providing economically viable solutions to the many kinds of building development problems including controlling costs. Kenyon (1964) looks at the issue from the architect’s point of view and describes the new role required of quantity surveyors as â€Å"being the encyclopedia of information on every aspect of building costs†. The Quantity Sur veyor, he says, must be fully informed of new methods of construction, new materials being introduced (e. g. Trassaco valley’s Prefab Construction) and be able to advice on comparative costs. Planning for the building must go hand-in-hand with planning for costs. This requires the Quantity surveyor to work hand-in-hand with the architect. Fulcher (1980) observers a trend of a shift in emphasis towards cost consultancy and suggests that quantity surveyors be fully conversant with all relevant cost factors in addition to the provision of traditional quantity surveying services. DESIGN VARIABLES AFFECTING THE COSTS OF BUILDINGS The cost of a building may be influenced by several factors including the shape, size, storey heights and total height among other building characteristics. It is essential that quantity surveyors be fully aware of the effect on costs of changes in any of these factors. The unit commonly used in comparing the cost implications of alternative designs is the square metre of floor area measured between the main enclosing walls i. e. the inner faces of the walls. This method makes no deductions for staircases, lift shafts, internal walls or other circulation space. Costs may be expressed this way for either the whole or part of the building. In practice however, allowance has to be made when using this method for differing conditions on different projects and sites. For example, two similar buildings constructed on different sites with different soil conditions will have different foundation costs and thus different overall costs. Effect of Plan Shape on Building Costs [pic] Generally, simpler shapes cost less to build than more complex shapes. This is because the longer, narrower, more complicated or irregular a shape gets, the higher the perimeter/ floor area ratio gets and in effect the higher the unit cost. Then again, irregular outlines yield increased costs for other reasons such as increased setting out costs, increased costs for site works, drainage works which tend to be more complicated and thus more expensive. In the two figures above, both outlines have the same floor area. In Building 2 however, there is 6% more external wall which encloses the same floor area as the first Building. As a result, setting out costs are up to 50% higher in Building 2 than Building 1. Excavation costs in the 2nd is around 20% higher than the 1st. metres of additional 100mm drain and 2 extra manholes required for the latter means up to 25% higher costs for drainage. Brickwork and roofing costs in Building 2 are also higher owing to the complicated design. Running costs arising from painting etc. may also be higher for Building 2. In practice however, cost control considerations have to be made in the light of practical and functional aspects of the building like daylighting requirements as well as a esthetics. There is the Quantity Surveyor needs to be able to maintain balance between cost savings, function and appearance. Cost saving alternatives should function satisfactorily and be aesthetically desirable. Effect of Size of Building on Cost Increasing the size of buildings generally lead to a reduction of unit costs, e. g. cost per square metre of floor area. This is because the costs of transportation, erecting or dismantling site buildings, material storage, water supply to site, temporary roads etc. may be fixed and would not change considerably even if the size of the project is increased. In larger projects also, the wall/floor ratios are reduced. Rooms may be larger with less need for internal partitions, skirting and decorations yielding overall cost savings. In high-rise buildings, lifts serve a larger floor area and a larger number of occupants which gives a cost advantage. Effect of Perimeter / Floor Area Ratio on Cost The wall to floor area ratio gives an indication of the planning efficiency of buildings. This is calculated by dividing the external wall area (including of windows and doors) by the gross floor area. This ratio can be used to compare different plans. In general, the lower the wall / floor ratio, the more economical a design proposal is. Circular buildings give the best wall to floor ratios but then the cost of circular work compared to that in straight walls offsets any savings due to the lower wall to floor ratio. In the two building plan shapes below, both buildings have an identical floor area of 244m sq. If both buildings are each of two storeys, then the total floor area is 488m sq. for each building. Lengths of enclosing wall: For Building A = 70m For building B = 100m (an increase of 43%) If the total height of the wall is 6m, Then the Areas of Enclosing Walls are: For Building A = 70 x 6 = 420 m sq For Building B = 100 x 6= 600m sq Wall Floor Ratios For Building A = 420 488 = 0. 86 For Building B = 600 488 = 1. 23 Conclusion Building B is very uneconomical as it has got a much greater area of enclosing walls than Building A. (Please insert dimensions on drawings manually) [pic][pic] EFFECT OF CIRCULATION SPACE ON COST Entrance halls in buildings, passages, corridors, stairways and lift wells are generally described as ‘Circulation Space’ otherwise described as ‘dead space’. These may be very expensive to maintain e. cleaning, heating, cooling, decorating costs. They however do not serve profitable purposes apart from providing means of access between different parts of the building. Spacious entrances and corridors may also add to the glamour and impressiveness of prestige buildings. To ensure economy in designs, it is important to reduce circulation to the barest minimum that en sures that the building functions satisfactorily. Cost however should not be the only consideration. Aesthetic and functional qualities should also be considered. E. g. the fire escape functions of corridors. Circulations ratios are defined as the proportion of Circulation Space to the Gross Floor Area. EFFECT OF STOREY HEIGHTS ON BUILDING COSTS Although variations in storey heights do not change the floor area, they alter the cost of buildings. The major elements of a building affected by changes in storey height are walls and partitions and their related finishings and decorations. Other possible changes arising variations in storey height include: i. An increase in the volume to be heated / cooled which would require larger heat / cooling sources and increased pipework or cables. i. Longer service pipes and waste pipes to sanitary appliances. iii. Costs to hoist roof members into place may increase. iv. Staircases and lifts (where available) will cost more to build. v. Ceiling finishings and decorations may cost more to apply. vi. In some cases, substantial increases in storey height may result in increased foundation costs to support the additional load. Generally, it must be noted th at when there are variations in storey height of a building, the Cube Method of Approximate estimating is difficult to operate. EFFECT OF TOTAL HEIGHT OF BUILDINGS ON COST Increasing heights of buildings result in increased construction costs. In practice however, the extra costs due to the increased height may be offset in part by the better utilization of expensive land as well as a reduction of external circulation works. Generally, in the development of private blocks of flats, it is cheaper to keep heights low. However, in cases where the costs of acquiring the site are very high and there is a potential for luxury rents, high rise private blocks may be advisable. Similarly, whilst tower block offices tend to be more expensive than low rise buildings, yet if the tower has around 1000m sq on each floor, the rents potential rent can offset the additional costs. BT 365 COST PLANNING AND CONTROL SEPT 2006 LECTURE 2 EFFECT OF CIRCULATION SPACE ON COST Entrance halls in buildings, passages, corridors, stairways and lift wells are generally described as ‘Circulation Space’ otherwise described as ‘dead space’. These may be very expensive to maintain e. g. cleaning, heating, cooling, decorating costs. They however do not serve profitable purposes apart from providing means of access between different parts of the building. Spacious entrances and corridors may also add to the glamour and impressiveness of prestige buildings. To ensure economy in designs, it is important to reduce circulation to the barest minimum that ensures that the building functions satisfactorily. Cost however should not be the only consideration. Aesthetic and functional qualities should also be considered. E. g. the fire escape functions of corridors. Circulations ratios are defined as the proportion of Circulation Space to the Gross Floor Area. EFFECT OF STOREY HEIGHTS ON BUILDING COSTS Although variations in storey heights do not change the floor area, they alter the cost of buildings. The major elements of a building affected by changes in storey height are walls and partitions and their related finishings and decorations. Other possible changes arising variations in storey height include: vii. An increase in the volume to be heated / cooled which would require larger heat / cooling sources and increased pipework or cables. iii. Longer service pipes and waste pipes to sanitary appliances. ix. Costs to hoist roof members into place may increase. x. Staircases and lifts (where available) will cost more to build. xi. Ceiling finishings and decorations may cost more to apply. xii. In some cases, substantial increases in storey height may result in increased foundation costs to support the additional load. Generally, it must be note d that when there are variations in storey height of a building, the Cube Method of Approximate estimating is difficult to operate. EFFECT OF TOTAL HEIGHT OF BUILDINGS ON COST Increasing heights of buildings result in increased construction costs. In practice however, the extra costs due to the increased height may be offset in part by the better utilization of expensive land as well as a reduction of external circulation works. Generally, in the development of private blocks of flats, it is cheaper to keep heights low. However, in cases where the costs of acquiring the site are very high and there is a potential for luxury rents, high rise private blocks may be advisable. Similarly, whilst tower block offices tend to be more expensive than low rise buildings, yet if the tower has around 1000m sq on each floor, the rents potential rent can offset the additional costs. APPROXIMATE ESTIMATING Also known as preliminary estimating, approximate estimating is used to produce a forecast of the probable cost of a future project before the building has been designed in detail. This helps the building client to get a fair idea of the likely financial commitments even before extensive design work is done. Quantity Surveyors use approximate estimating methods to help provide cost assessments and give advice on design proposals as well as variations to the design. Thus they are able to provide more economic alternative solutions. The accuracy of approximate estimates depends however on the quality of information on which it is based. This can be achieved with effective communication and full co-operation between the architect, the quantity surveyor and the building client right from the inception of the project. In most cases, it is the first figure that the client will always remember. It is therefore important to ensure that as information as possible is available to give a reliable preliminary estimate. It is also essential that the quantity surveyor surveys the site to be sure of the site conditions such as ground water level, load bearing capacity of the soil, obstructions on the site etc. , all of which can significantly affect costs. Approximate Estimating Methods Different methods may be used to find approximate estimates depending on the client’s expectations and the information available. The methods commonly used include the Unit method, Cube method, superficial or Floor area Method. Unit Method In this method, costs are allocated to each accommodation unit of a building e. g. persons, seats, beds, car spaces etc. To find the total cost, the total number of units is multiplied by the unit rate. Unit rates may be derived by analyzing a number of fairly recently completed buildings of the same type. Allowance has to be made though for any variations in site conditions, price changes since the completion of the scheme, variations in design materials and methods of construction. Variations arising from changes in design and construction methods can be difficult to assess. Thus a major disadvantage of this method is the lack of precision. It is suggested therefore that costs be given in ranges so that more precise costs can be determined at a later stage when much more detailed information is available. Example (Fictional figures) Hospital wards – 10,500,000 per bed University Lecture Hall 5,000,000 per seat Cube Method The cubic content of a building is obtained y multiplying the length, width and height (external dimensions) of each part of the building. The method used to determine the height of the building depends on the type of roof and whether or not the roof is occupied. For a normal building with unoccupied pitched roof, the height is taken from the top of the concrete foundation to the mid point between the intersection of the wall and the roof (i. e. half the height of the roof). If the roof space is to be occupied, the height is measured three-quarters of the way up the roof slope. In the case of flat roofs, the height is taken 600 mm above roof level. However if the flat roof is surrounded by a parapet wall which has a height exceeding 600m, then the height is measured to the top of the parapet wall. Projections like porches, steps, bays, dormers, projecting roof lights, chimney stacks, tank compartments etc are measured and added to the cubic content of the main building Illustration of Cube Method Consider a block of 5 unit factories made up workshops and offices as shown below | | | | | | | | | | | | Insert Drawing of Factory block in Elevation Calculations Assume cube rates as follows: Office @1,200,000 cedis per metre cube Factory @ 750,000 cedis per metre cube Effective height = 500 + 4. 000 + ? (2) (Top of fdn to G. L) Top of G. L to roof Roof (unoccupied) = 5. 500 m Volume of workshops = 50 x 20 x 5. 5 = 5500 metre cube Volume of offices = 50 x 5 x 5. 5 = 1375 metre cube Estimated cost of block = [emailprotected],000 = 4,125,000,000 [emailprotected],200,000 = 1,650,000,000 5,775,000,000 cedis SUPERFICIAL METHOD (FLOOR AREA METHOD) This is a popular method of approximate estimating. Most data are expressed in this form. In this method, the floor area of the building on all floors is measured between the internal faces of the enclosing walls. No deductions are made for internal walls, partitions, stairs, landings, lift shafts and passages. A unit rate is calculated per square metre of floor area. The probable cost of the building is obtained by multiplying the total floor area by the calculated unit rate. NB. 1. In practice, if the constructional methods or the quality of finish used varies considerably for different parts of the building, it will help to separate floor areas so that different unit rates can be applied to different parts of the building. . When assessing unit rates or extracting rates from cost analysis, consideration should be given to any variations in storey heights. Example: COST CONTROL DURING CONSTRUCTION Apart from the design stage, Costs need to be controlled at all stages of construction if the scheme has to be completed within the client’s budget. Having developed a cost plan at the design stage, it is essential that costs are monitored through out construction to ensure that the scheme is done within budget. Elements of Cost Control The main elements in any cost control system are: . Measure progress. 2. Calculate the budget allowance up to that stage of work. 3. Compare the budget allowance with actual costs. 4. Take corrective action. Harris and McCaffer (2001) compare controlling costs to the domestic thermostat which switches off when a system overheats. They argue that â€Å"the system should help to identify where corrective action is necessary and provide pointers to what that action should be†. They however point out the long response times that cost control systems take to respond to any problems identified. This is because â€Å"even the best cost control system provides information on what was happening last week or last month† (Harris and McCaffer 2001). COST CONTROL SYSTEMS The cost control system used depends on a number of factors such as: 1. The size of the contract. 2. Complexity of the contract. 3. The attitudes of the management staff. 4. The level of sophistication of top management. Some of the cost control systems used are: 1. The overall profit or loss method. 2. Profit or loss on the contract at valuation dates. 3. Unit costing 4. Standard costing systems. 5. PERT (Performance Evaluation and review technique. References Seeley, Ivor Building Economics Macmillan Basignstoke 1993 Kenyon, A W An Architect’s thoughts on the profession of quantity surveying The Quantity Surveyor (July / August 1964) Harris, F McCaffer R Modern Construction Management EPP Books, Accra 2005 Asworth, A Cost Studies of BuildingsLongman, Harlow 1994 Ferry J D Brandon P S Cost Planning of Buildings BPS Books, Oxford 1994